Suche Park Board und Bindung!


  • ja das mit dem urlaub wär möglich, nur der termin wär frühestens mitte/ende januar und ich schätze das ist ein bissl zu spät um dort boards zu testen, weil dann das meiste schon ausverkauft ist?
    das mit der email mach ich, wenn ich mich endgültig endschieden habe:)
    ja ich denk auch, dass 151 zu kurz ist. würde aber auch 1-2cm weniger wie 155 haben also guck ich mir noch andere boards an, wenn mir nix gefällt hol ich das 155er.
    stimmt gut das du das mit der schuhgröße ansprichst. hab atm nitro eero tls boots mit größe 10,5/43,5. waist mitte 25,6cm und nose/tail 30, was ja eher breit ist...
    das 155er airobic hat 25,2/29,8 dass sollte doch reichen?


    nitro kauf ich nie wieder. der kundenservice ist zum kotzen und die qualität mies.
    hab ja schon erwähnt, dass bei meinem prime die kante an der box kaputt gegangen ist. das sind ja 2 kanten und an der stelle im tail wo die zusammenkommen hat sich die kante vom board abgelöst.
    tja ich hab das dann zum kundenservice geschickt. hatte eigentlich kaum hoffnung nen neues board zu bekommen, weil es ja kein materialfehler war, sondern einfach die scheiß qualität. naja die haben sich dann richtig viel zeit gelassen(ich gehe davon aus das sie das board verschlammt haben;)). das ende vom lied nach 2,5monaten haben sie mir nen neues board geschickt.

    Board: Skate Banana 10/11
    Binding: Union Contact Pro 10/11
    Boot: Dee Luxe Del Mar 10/11

  • naja kanten rausreissen auf boxen, das ist so ein thema. das kannst du bei jedem brett wenns dumm läuft.


    aber zur breite, das wird schon eng mit 25.2. Das kleiner geht dann da auf keinen fall mehr. die nitro bots sind ja auch ned so klein, schlag mich slber noch mit einem rum. Also ausprobieren solltest das, wenn du dich dafür entscheidest, mal erst im trockenen. Könnte auf jedenfall sehr eng werden, jeh nach stancebreite.

    Dies ist keine Signatur. Hier gibts es keine Informationen mehr. Wer mich kontaktieren möchte, muss sich andere Wege (als PM) via meinem Profil suchen.

  • wieso wird einem eigentlich überall panisch davon abgeraten mit kürzest möglichen boards zu fahrn?
    meine ideale länge laut shops etc. ist auch sowas um die 155 oder so ist mir persönlich aber viel zu lang. nächstes board wird definitiv unter 150.
    er schreibt hier ja rein das er hauptsächlich jibben will also finde ich 155 viel zu lang das is ne kickerboard länge bei der größe und dem gewicht.

  • also erstens ist das airobic ein jibboard, das braucht man ned wirklich kürzer nehmen als das was man normalerweise fährt.
    zweitens ist im das airobic in 151 zu schmal, vermute ich.
    Park and Ride WebShop // https://www.snowboarden.de/shop/ - Snowboard Airobic von Bataleon Airobic 151 - 10/11 0010812
    https://www.snowboarden.de/sho…77dbabc402f0e1432ebb1feac


    und wenn ma ein airobic will, gibt es nur 151 oder 155, kann ich leider auch ned ändern. und ich beziehe mich hier nur auf das baord, pauschal kann ich das so ned sagen

    Dies ist keine Signatur. Hier gibts es keine Informationen mehr. Wer mich kontaktieren möchte, muss sich andere Wege (als PM) via meinem Profil suchen.

  • grad jibboards fährt man doch deutlich unter seiner länge
    und grad diese saison sind sie endlich draufgekommen das bei jibboards weniger länge nicht unbedingt weniger breite beudeutet keine ahnung wie das bei bataleon ist aber von anderen marken kannst du teilweise selbst mit schuhgröße 45 noch boards die an die 150 reichen fahrn

  • grad jibboards fährt man doch deutlich unter seiner länge
    und grad diese saison sind sie endlich draufgekommen das bei jibboards weniger länge nicht unbedingt weniger breite beudeutet keine ahnung wie das bei bataleon ist aber von anderen marken kannst du teilweise selbst mit schuhgröße 45 noch boards die an die 150 reichen fahrn


    das airobic 151 is defintiv zu schmal für mich...
    bei dem 155 gehts grad noch so. deswegen guck ich mich noch bissl nach breiteren boards um.
    hast du zufällig welche im kopf?;)

    Board: Skate Banana 10/11
    Binding: Union Contact Pro 10/11
    Boot: Dee Luxe Del Mar 10/11

  • ich weis ja nicht wie ernsthaft du wirklich jibben willst undso aber ich meinte ja nur das vielen halt zu lange boards empfohlen werden u.a. mir auch.
    von der breite her ist das ding wirklich wegen 4 mm zu schmal für dich?
    sonst hat das stepchild jibstick bei 148 1 mm weniger breite als das 155 airobic und bei 153 2 mm mehr breite ist haltn rocker board
    sonst noch das K2 WWW wide in 153 ist sogar n cm breiter. halt auchn rocker.
    ich weis nicht was du für ne schuhgröße hast aber eigentlich gehn die meisten 150er jibboards bis größe 44

  • also ich weiss ja ned wie ihr das so macht, aber ich fahr so 24.6-25 mit schuhgrösse 42.5... und viel schmäler möchte ich da ned gehen.


    das Jibstick ist aber sicher ne Alternative wenns ums reine jibben gibt. Cooles Teil.

    Dies ist keine Signatur. Hier gibts es keine Informationen mehr. Wer mich kontaktieren möchte, muss sich andere Wege (als PM) via meinem Profil suchen.

  • ich fahr schuhgröße 43 und 245 und bis 240 ises eigentlichkein problem 245 is ideal aber schmaler sind die meisten dann eh nichtmehr

  • geht für mich ned... ich bin schon bei 24.2 mit nem kurzen boot beim carven mit der schuhspitze im schnee... mag beim jibben möglich sein, weiss ich ned...
    wobei man den stance ja nicht vergessen sollte, ich fahr halt auch keienn 64er stance ;)

    Dies ist keine Signatur. Hier gibts es keine Informationen mehr. Wer mich kontaktieren möchte, muss sich andere Wege (als PM) via meinem Profil suchen.

    Einmal editiert, zuletzt von Masl ()

  • ja alles unter 24.5 is auch nichmehr wirklich allround tauglich und umso nähers an die 24 geht wirds auch einigermaßen eklig zu fahrn. aber wie gesagt jibboards die für meine länge passen (74kg 1.76cm) reichen für meine schuhgröße mehr als locker bei den meisten marken kann ich bis 147 boards runter gehn und es langt von der breite noch ziemlich gut. bsp rome artifact rocker 147 24.6
    aber ich muss auch dazu sagen das ich irgendwie ziemliche probleme hab mit der flex von boards ich muss eigentlich eine länge kürzer nehmen damit das board auch so weich ist wie auf der skala angegeben und so richtig carven tu ich damit ja dann sowiso nicht von demher juckts mich auch nicht wirklich obs n tick zu schmal ist
    funkink 153 fühlt sich für mich nicht nach 3.5 flex an sondern eher nach 5.

  • das ist ja interessant FFDS wir ham bei größe, gewicht und schuhgröße die gleichen werte.:p
    was für ne stance und winkel fährst du denn? und was für boots haste?
    denn <=245 hört sich für mich arg wenig an und ich glaub mit meinen nitro boots würd das net passen.

    Board: Skate Banana 10/11
    Binding: Union Contact Pro 10/11
    Boot: Dee Luxe Del Mar 10/11

  • ich fahrn funkink usa edition 153 meines wissens nach ist das ding genau 245 breit
    bis dieses jahr mit rome libertine boots in gr 43 gefahrn
    stance is 60 breit 12 / -12

  • jepp ist 24.5... das neue usa edition hat übrigens keinen setback mehr, hast du zuvor glaube ich mal irgendwo erwähnt.


    bartosch... dann riskiers mit nem airobic in 151... funkink geht sicher auch, das halt aber nen gleichmässigen flex, das airobic ist weicher in der mitte und etwas härter in tip und tail...

    Dies ist keine Signatur. Hier gibts es keine Informationen mehr. Wer mich kontaktieren möchte, muss sich andere Wege (als PM) via meinem Profil suchen.

  • hi,
    hab mich noch bissl umgeguckt und bin auf das academy propaganda gestoßen.
    laut herstellerangabe perfekt zum jibben und jumpen.
    hab aber leider noch überhaupt nix gehört über academy.


    mich würd interessieren, "was man so sagt" über academy und deren boards?
    und hat evtl schon jemand das propaganda gefahren?

    Board: Skate Banana 10/11
    Binding: Union Contact Pro 10/11
    Boot: Dee Luxe Del Mar 10/11

  • It's funny how people tend to end up only looking at the same brands everytime.
    I have to admit however that the Forum destroyer is a totally rad board, a classic too. Can't go wrong with that one.
    I LOVED the Ride machete. Only got to try it for 20 mins or so but the pop was amazing, very snappy! Ride doesn't make boards but rockets, the bases rock, always fast, low on maintenance. Made me overshoot my first few jumps though.
    I know nothing about the other boards you named from experience, but I still want to try that Gnu sometimes.


    If you can, take a peek at brands like Capita, Imperium, Signal (allthough I wouldn't reccomend signals to people who only or mostly ride indoor slopes) Sapient (if you can still get one, they stopped making them but the things are brilliant) Never summer (if you can afford them.. they have some awesome decks, the Evo is a beast!).


    I just love obscure boards that not everyone rides :P... but if you must, give the Ride DH2 a chance aswell. Proven concept. Bit to stiff for my taste but works.

    I can understand German replies :)
    Selling: Ride Canvas Tokidoki 153 (wms) + Burton Lexa Bindings (L 38-41) PM if interested

  • hey muninn,
    the good think about boards from brands, which quite a lot of people ride, is that you know quite well what you buy. especially if you dont have the possibility to test some stuff, which i do not have.:(:(
    i've been looking after the signal park rocker, but it is to slim for my feet.
    i also had a look at the capita(doesn't it belong to the brands you had on your mind in your first sentence?) boards and i like the horrorscope, but i think its too soft.
    never heard about imperium...
    i like the NS boards, but they are very expensive. i think at the moment i don't need one. in 2 or 3 years, when i am a more advanced rider, i propably get one.


    this year i will make up my mind between the Ride DH2, Forum Destroyer and Völkl Squad Rocker.
    at the moment i tend to take the ride board. but i am wondering, how good it works for flat tricks, butters and rails/boxes. it seems to be quite stiff, maybe too stiff?
    and what i'm also wondering about if the standard DH2 with ProRize or the DH2.4/5 with hybrid ProRize(camber&rocker) would be better.

    Board: Skate Banana 10/11
    Binding: Union Contact Pro 10/11
    Boot: Dee Luxe Del Mar 10/11

  • That's definitely true. Allthough I believe the only way of really finding out what kind of board matches your personal preferences desires and skills is to try as many as you can. Especially in case of going rocker, chamber or something in between, it is very much a 'personal taste' thing. Some love it, some hate it.


    The DH2 is a bit stiff, I wouldn't be my first pick it for flat tricks. Would sooner go for the machette if you insist on a Ride board, but depends a bit on your weight and if you are a stronger guy I guess :P. I'm not so strong so stiff boards always give me a headache. My Bf rode the destroyer and he totally loved it.


    On the Capita thing, I don't know. In Holland not many people ride Capita, not sure how it is with the Germans, but I don't see them that much in the resorts either (capita I mean).


    Plz don't feel obliged to reply in English btw :D I understand German well enough, just can't write it.

    I can understand German replies :)
    Selling: Ride Canvas Tokidoki 153 (wms) + Burton Lexa Bindings (L 38-41) PM if interested